What Size Generator to Run a 2, 000 Sq Ft House?

For homes without reliable access to the power grid, or for those who want a backup power solution in case of outages, a generator can be a critical appliance. But with generators coming in many different sizes and capacities, it's important to choose the right one for your needs.
This article will explore what size generator is needed to power a typical 2,000 square foot home.

Factors That Determine Generator Size

Now, consider several key factors influence what size generator a 2,000 sq ft house would requires:

1. Critical Loads

The most important consideration is what appliances and devices you consider essential to power during an outage. Typically this includes things like refrigerators, freezers, furnaces, well pumps, lighting, and outlets for charging phones and powering computers. The starting and running wattage of these critical loads must be added up to determine the minimum generator size.

2. Convenience Loads

Next, think about other electrical devices that aren't absolutely essential but that you'd like to power for convenience if possible, such as TVs, microwaves, dishwashers, washing machines, air conditioners, etc. These convenience loads can significantly increase the wattage requirements.

3. Simultaneous Usage

Another factor is how many devices and appliances you expect to be running at the same time. The generator needs sufficient running watts to handle the maximum simultaneous load. Avoid overloading the generator by running too many high-wattage items simultaneously.

4. Starting Wattage

In addition to the running wattage, the generator must provide sufficient starting or surge wattage to handle the extra power needed when electric motors in devices like refrigerators, freezers, furnaces, AC units, and well pumps first start up. This can be 2-3x their running wattage.

5. Future Needs

Lastly, consider if your power needs are likely to grow in the future, in which case sizing the generator larger than your current minimum requirements would be prudent. It's better to have extra capacity than to be underpowered down the road.

VTOMAN power station

Estimating Power Needs

So, how much wattage does a typical 2,000 sq ft home need? Well, it varies considerably depending on the specific electrical devices, but here are some general estimates:

Critical Loads

  • Refrigerator: 600-800 running watts / 1200-1600 starting watts
  • Lights (10 LEDs): 100 running watts
  • Furnace: 600 running watts / 1800 starting watts
  • Sump Pump: 1000 running watts / 2200 starting watts
  • Well Pump: 1000-1500 running watts / 2000-3000 starting watts
  • Various Outlets: 400 running watts

Convenience Loads

  • Electric Stove: 1500 running watts
  • Microwave: 600-1200 running watts
  • Dishwasher: 1200 running watts
  • Washing Machine: 1000 running watts
  • Window AC Unit: 1000 running watts
  • TV: 200-400 running watts
  • Laptop: 200-250 running watts

For just the core critical loads, the running wattage needed could be in the range of 4,000-5,000 watts, with a starting wattage requirement of potentially 6,000-10,000 watts. Adding in some typical convenience loads could boost the running wattage to 6,000-10,000 watts or more.

Generator Size for a 2,000 sq ft House

Based on those power estimates, here are some general generator sizing guidelines for a 2,000 sq ft home:

  • For just the critical emergency loads: A portable generator with a starting wattage of 6,000-10,000 watts and a running wattage of around 5,000 watts would likely suffice. If you just want to run devices such as laptops, smartphones, LED lights, routers, televisions, and small kitchen appliances, a portable generator in the 1,000-2,000 watt range is ideal.

  • For critical loads plus some convenience items: Consider a portable generator with a starting wattage of 10,000-15,000 watts and a running wattage capacity of at least 7,500 watts. This will provide more flexibility to power additional conveniences beyond just the essential emergency loads.

  • For whole-house backup power: For backing up an entire 2,000 sq ft home, a large stationary home standby generator with a capacity of 20kW or more is usually recommended. These units are permanently installed and automatically turn on when an outage occurs. Look for models that offer sufficient wattage capacity and features like automatic transfer switches and weather-protective enclosures.

When sizing a generator for your specific needs, it's important to carefully assess your power requirements and choose a model that offers sufficient starting and running wattage capacity to handle your anticipated loads. Consult with a professional electrician or generator specialist for personalized recommendations based on your unique situation.

VTOMAN power station at home

Other Considerations

In addition to size, here are some other important things to weigh for a generator for whole home use:

Energy Sources

Generators are fueled by either gasoline, propane natural gas, or sometimes a combination. Propane and natural gas burn cleaner and can be stored indefinitely, while gasoline is cheaper but has a limited shelf life.

A special mention goes to solar generators. They produce no emissions and have minimal operating costs. However, solar generators typically have lower wattage capacities than fuel-powered models and rely on sufficient sunlight exposure to recharge, which can be an issue during extended outages or inclement weather.

For a 2,000 sq ft home, a robust solar generator setup with a large battery capacity (e.g., 5+ kWh) and sufficient solar panels (e.g., 1000+ watts) would be needed to power essential loads for an extended period.

Noise Level

Generators can produce significant noise, which is a pain in the butt if you have nearby neighbors or strict noise regulations in your area. Inverter generators tend to be quieter than traditional portable generators, thanks to advanced muffling and sound-dampening technologies. Home standby generators can also be equipped with sound-attenuating enclosures to minimize noise. Consider the generator's noise level specs and read customer reviews to gauge real-world performance.

Outlets and Connectivity

Ensure the generator has the right number and types of outlets you will be using. Most portable generators include a mix of 120V standard household outlets and 240V outlets, which are for high-powered tools or appliances. Some have USB ports to charge mobile devices and parallel connectivity to connect multiple units together. Standby generators may require a different approach: consider one that has a transfer switch and that will easily connect the unit to your home electrical system and can automatically start when an outage happens.

Ease of Use and Maintenance

Consider ease of use and maintenance requirements of the generator. Electric push-button start, intuitive control panels, and low-oil shutdown switch-off will help prevent engine damage. Some models offer remote monitoring via mobile apps that let users check on statuses and even receive alerts. Regular maintenance of oil changes, air filter replacements, and spark plug checks will be crucial to optimum performance and durability of an engine. Choose the model with easily reachable parts and clear information on how to maintain them.

VTOMAN power generator indoor

Portability and Storage

If you will be using a portable generator, consider the weight and size of the unit, including how easily it can be moved around with wheels or handles. Make sure you have adequate space to store it when not in use, in a well-ventilated area, and out of the way of living spaces. For standby generators, installation location becomes a factor and must be discussed with a professional taking into consideration access to fuels, electrical connections, and local building codes.

Safety Features

Purchase a generator, taking priority with models that have built-in safety features that protect the unit and your home. Ensure the models you go for have overload protection, low-oil shutoff, and automatic voltage regulation for protection against surges and power fluctuations. If portable units, ensure proper grounding and GFCI outlets to minimize the risk of electrical shock. Gas-powered generators are only used outdoors in well-ventilated areas for avoiding carbon monoxide accumulation.

Warranty and Customer Support

Buy a generator from a reputed brand that offers comprehensive warranty coverage and responsive customer support. Consider the history of the manufacturer in terms of reliability and customer reviews. A strong warranty, like 5-10 years, protects the investment and brings peace of mind to customers. Consider factors such as the availability of local service centers and how easily replacement parts can be obtained if needed.
All these considerations against generator size will help you decide upon and select a model that best fits your needs in backup power, budget consideration, preference, and home environment. 
If all things considered, along with generator size, you can make an informed decision and select a model that best meets your backup power needs while aligning with your budget, preferences, and home environment.

Summary

In summary, powering a 2,000 sq ft home during an outage requires carefully evaluating your power needs and selecting an appropriately sized generator. For just critical backup loads, a quality 6,000-10,000-watt portable generator is often sufficient. For greater convenience and capacity, a 10,000-15,000-watt portable model provides more flexibility. And for complete whole-house coverage, a 20kW+ home standby unit is the optimal choice. By following these sizing guidelines and carefully weighing other critical factors like fuel type, noise level, and brand reliability, you can find the perfect generator to keep your 2,000 sq ft home powered and resilient in the face of electrical outages.

RELATED ARTICLES